Skip to main content

Notes

A note is the core data, created and managed directly by Kara itself. Conversation is the most important data a person or a business has: Kara captures it and draws it out into something usable - so it can suggest the next action quickly and accurately, instead of letting a meeting slip past and be forgotten.

One note is one meeting, and everything that comes out of it lives in the same place: the recording, the transcript, the summary, the tasks, and whatever else you asked Kara to build.

Gathering notes by client or project is what Spaces are for.

A note open: the title, the Notes and Summary tabs with a button to generate a new output, and below them the summary Kara wrote

The life of a note​

Four stages, in the order you meet them:

  1. Recording - press record, talk normally, press end.
  2. The transcript - Kara turns speech into text, timestamped and split by speaker.
  3. The summary - condensed, structured, every point traceable back to the passage that produced it. Tasks and facts are extracted at the same time.
  4. Sharing - getting the result out: inviting people, sending email, or building an artifact to send a client.

Typing your own notes​

Alongside what Kara writes, you can type your own at any time - and Kara never edits or overwrites what you typed. The summary and everything else Kara produces live in separate outputs, apart from your own words, so you can always tell which is yours and which is the machine's.

Typing while the recorder runs works fine. It is useful for marking down what is not in the speech:

  • A house number, a unit code, a licence plate the client said too fast.
  • Your own read: "the client seems uneasy about the legal side".
  • A task you took on, so you do not forget it.

Recording is not always possible - the client does not agree, the conversation happens on the street, or you simply need three lines. A note with no recording still works with Ask Kara and can still produce artifacts; Kara just has less to work from, so the result depends on how well you wrote it down.

Select a passage you typed and choose Ask Kara about the selection, or ask outright: "From this note, draft a recap email for the client.", "Pull out the tasks."

Typing fast

Write in bullets, do not try to form sentences - Kara can tidy them afterwards. Numbers and proper nouns are the exception: write those exactly, because those are the ones Kara cannot guess for you.

Your first meeting​

Do these seven steps once and you have the whole Kara loop. Nothing to prepare but a real conversation - or two minutes talking to the device to try it.

  1. Create a new note (⌘ N).
  2. Ask permission, then press I agree, start recording.
  3. Choose the audio source - Mic only in person, Mic + system audio online.
  4. Have the meeting. Let it run: lock the screen, open another app, type extra notes - the recorder runs in the background.
  5. Press End (⌘ E). Kara runs four processing steps; you do not have to sit and watch.
  6. Read the result - the summary, the tasks, the transcript. Click a line in the summary to jump to the passage behind it.
  7. Do something with it - have Kara draft a Client recap email, ask a follow-up with ⌘ K, or open Todos and confirm what Kara pulled out.

Creating a new note​

Click the new-note button, or press ⌘ N (on Windows, Ctrl N).

A new note lands in whichever space is open. Created from anywhere else it belongs to no space and sits under All notes - which is a perfectly normal state, so you do not need to create a space first. See Spaces.

From the note you just made, click Record to open the recorder - or just type, if this meeting is not one to record.

One recording session at a time

Create a new note while recording and Kara reminds you: "End the running recording before creating a new note." This is deliberate: two parallel sessions would split one meeting's audio in half.

Asking permission before recording​

Recording people without their knowledge is not on, and in many situations it breaks the law. Kara reminds you of this right before it captures anything.

The "Before you start recording" screen says three things:

  1. Tell everyone in the meeting that you are recording, and get their agreement.
  2. Where the audio goes - Kara sends the audio and the transcript to two third parties for processing: Soniox (speech to text) and Google Gemini (summarizing and extracting data).
  3. Where to read the detail - links to the Terms and the Privacy Policy.

Click I agree, start recording to record. Click Cancel or click outside and the session is cancelled with no data captured at all - the note is not created either.

The Before you start recording dialog: the reminder to ask permission, a "Where the audio goes" block naming Soniox and Google Gemini with Terms and Policy links, and Cancel and "I agree, start recording" buttons

There is no need to be formal about it. One sentence at the start is enough:

"Do you mind if I record this so I have proper minutes? It's for my own use, not going anywhere else."

If somebody is not comfortable, switch the recorder off and type your notes as usual.

Turning the reminder on or off​

Settings → General has an Always ask permission before recording option:

  • On - every recording has to be confirmed. Choose this if you often record with people you do not know.
  • Off - it only asks the first time. Faster when you mostly record alone or with a team that already knows.

Beyond this screen, every session also opens with a reminder line on the recorder bar - "Remember to ask everyone's permission before recording" - which then gives way to the audio-source chip after a beat.

Turning off the reminder does not change your obligations

Turning it off removes one tap in the app. The responsibility to tell the people being recorded is exactly as it was.

A few principles worth keeping when you work with client data:

  • Say what it is for - "so I have minutes", not recording quietly to use later.
  • Do not record the private parts - when a client turns to family or health, pause the recorder.
  • Be careful sharing - a note shared outside takes the whole conversation with it. See Sharing a note.

The detail about your data is in Your data.

Choosing the audio source​

Before recording, Kara asks where to capture from. Get it wrong and the recording is missing half the conversation, so this step is worth two seconds of attention.

SourceCapturesUse when
Mic onlyThe room, through the device's microphone.In-person meetings, coffee with a client, showing someone a property.
Mic + system audioBoth the room and what the device plays - meaning the person at the other end too.Online meetings (Zoom, Google Meet, Teams), calls through the computer, reviewing a video you need minutes from.
Mic only in an online meeting

Leave it on Mic only for an online meeting and the transcript will hold only your side. Kara warns you in advance with a "No system audio" notice on the recorder bar.

When system audio will not turn on​

A few common causes:

  • The browser has not been given permission to share audio. When the browser asks which screen or tab to share, remember to tick the share-audio box.
  • The operating system is blocking it. Some machines need screen-recording permission granted to the browser under system security.
  • The device does not support it. On a phone, system audio usually cannot be captured.

The way around it when stuck: put the call on speaker and record with Mic only. Lower quality, but nothing is lost.

To change source mid-way, end the running session, pick the source again and carry on recording into the same note - the audio already captured stays.

Test before an important meeting

Record 30 seconds in exactly the configuration you intend to use, then open the transcript and check both sides are there. Thirty seconds now is cheaper than a meeting with no audio.

Headphones go silent while recording​

Kara only takes a copy of the audio from the tab or screen you share - it does not mute what plays in your headphones. If they go quiet the moment recording starts, the usual culprit is a Bluetooth headset: when Kara opens the mic and the device is using the headset's own mic, the headset switches to call mode. On Windows, the Headphones (Stereo) output the meeting plays through then goes silent.

Pick one of three fixes:

  1. Switch to the computer's mic. Windows: Settings → System → Sound → Input; Mac: System Settings → Sound → Input - choose the built-in mic. The headset goes back to just listening, and the sound returns.
  2. Use wired headphones. They do not switch modes.
  3. If you must use the headset mic - in Zoom, Meet or Teams, set the speaker to Headset (Hands-Free) instead of Headphones (Stereo). It sounds a little thin, but nothing is lost.

Also check the meeting tab is not muted. Still stuck? Contact support with your operating system, browser, headphone type, and whether you shared a tab or the entire screen.

Recording​

Recording is the main way a meeting gets into Kara. You press record, talk normally, press end - the rest is Kara's job.

Kara takes a second or two on "Setting up audio…" before it really captures. Wait for the clock to run before getting into it.

ButtonDoes
Pause (⌘ P)Stops capturing. Press Resume to carry on into the same note.
End (⌘ E)Closes the session and starts processing.
DiscardOnly in the first few seconds - drops what was just captured and leaves the note alone. See below.

While recording you can use the device normally: lock the screen, open another app, type more notes. The recorder runs in the background.

Discarding in the first few seconds, then recording again​

Hitting record by accident is ordinary. So for the first eight seconds or so

  • counted by audio actually captured, not from when you pressed - the End button's place is taken by Discard:

  • Discard drops what was captured and leaves the note as it was. There is no confirmation dialog, because eight seconds in there is nothing to lose.

  • The note returns to its original state with the Record button in the middle - press it to start over, right there, without creating a new note.

That clock stops while you are paused, and only runs once audio is really arriving - so however long the browser's screen-share dialog sits open, it does not eat into those eight seconds.

Past eight seconds, what has been captured starts to be worth keeping and End takes its place back for the rest of the meeting.

What about the empty note left behind

If you discard and then decide not to record after all, the empty note is still there - delete it with ⌘ ⌫ like any other note.

When Kara pauses by itself​

Kara does not fail silently - every interruption comes with a notice:

  • An incoming call - capture stops, and carries on after you hang up.
  • Connection lost - recording continues normally; transcription happens once you are back online.
  • Device storage full - capture stops, and what was captured is kept.
  • The plan's transcription time is used up - recording continues; only transcription pauses.

How to handle each is in Interrupted recording.

Transcription time​

The plan limits transcription, not recording. One session can run up to 5 hours on every plan; what differs between plans is how many of those minutes Kara turns into text - 30 minutes per meeting on Starter, 90 on Pro, 180 on Team and 300 on Enterprise.

  • With a few minutes left, Kara says: "About N minutes of transcription left."
  • At the limit, Kara keeps recording and stops only the transcription - so you lose no audio, and you can transcribe the rest once the limit is raised.

Check where you stand under Settings → Usage, and how the limits make up a plan's price under Pricing.

Getting a good recording​

  • Put the device in the middle of the table, face up, not face-down and not in a shirt pocket.
  • Avoid loud background music, or a fan blowing straight at the mic.
  • Say the other person's name at the start - Kara attaches names to the transcript more accurately.
  • Say important numbers out loud ("two point eight billion") rather than pointing at a screen.

Kara does clean up noise and echo and level the volume before transcribing, but a good seat still beats any algorithm.

Ending the recording​

Press End (⌘ E). From here everything is automatic - Kara runs four steps and shows the progress:

  1. Converting to text - producing the transcript from the captured audio.
  2. Summarizing - writing the summary to the meeting type.
  3. Creating next actions - pulling out tasks into the Todos tab.
  4. Extracting facts - picking up names, numbers, places, dates.

The summary, the transcript and the extracted data appear all at once when all four are done, rather than trickling in. An hour-long meeting usually takes a few minutes.

You do not have to watch the screen. Close the app, go and do something else - come back and the note is ready. End it from another page and Kara tells you "Meeting processed" with a View summary button.

No summary after processing? See No summary appeared.

Transcripts and language​

The transcript is the full text of what was said in the meeting, timestamped and split by speaker. It is the foundation of everything else: the summary, the tasks and Ask Kara's answers all resolve back to it.

Each passage carries:

  • A speaker - Kara separates voices and labels them. Attach a label to a real contact under People in the note.
  • A timestamp - click it to hear that passage again.
  • The text - verbatim, unedited.

While listening back, → skips forward and ← skips back.

The summary is an interpretation; the transcript is the evidence. Before passing a number to a client or committing to a date, click the quote and read the original.

Language​

Kara has two separate language settings; do not confuse them:

SettingAffects
Interface languageThe words on the app's buttons, labels and menus.
Default AI languageSpeech to text, transcripts, and Kara's answers.

Change both under Settings → General. The detail is in Language.

For a meeting held in both Vietnamese and English - ordinary when you work with overseas clients - two things are worth knowing:

  • The transcript keeps the language actually spoken in each passage.
  • The summary is written in the AI language you set - or leave it on Automatic (follow the content) and Kara picks the language most of the meeting was in.

For a summary in a different language, change Language under refine and regenerate.

When the transcript is wrong​

Transcription is never 100% accurate, least of all with proper nouns, trade vocabulary, and places where several people talk over each other. To get fewer errors: pick the right audio source, put the device near the speaker, say the other person's name at the start, and read numbers and addresses out clearly instead of abbreviating.

If a transcript is missing a whole passage or is unusually wrong, see Transcript errors and gaps.

The summary​

A few minutes after you press End, Kara returns the meeting summary: condensed, structured, and every point traceable back to the passage that produced it.

The structure follows the meeting type, but usually holds:

  • Context - what the meeting was about, and with whom.
  • The discussion - the points covered, following the thread of the conversation.
  • Decisions - what was settled.
  • Action items - each side's commitments, with due dates where they were said. This is a real checklist: tick a line here and the task leaves Todos, and the other way round. The foot of the tab carries "Synced with the Todos list" so you know where the tick goes. Depending on the template, the section may be called Next actions.

A note's summary: the Summary tab open, below it the opening paragraph, an Attendees & Context section and a Discussion section

Click Full screen for close reading, or to put it on a big screen for the team. Leave with Esc.

Do not send the summary straight to a client

The summary is written for you - it includes what the client said in confidence and your own blunt observations. To send something out, use Client recap email under Artifacts: the same content, written in a voice meant for the client.

Meeting types​

A property viewing and a Monday team meeting need two quite different summaries. Kara detects the meeting type and writes the summary in the structure that fits it.

The ten standard types:

TypeRight when
SalesMeeting a client to introduce, persuade, negotiate. The one brokers use most.
1:1One-to-one, about the person: direction, feedback, personal difficulties.
Check-inThe team reporting progress on a regular cadence.
Kick-offStarting a project or a new phase.
PlanningPlanning, dividing work, setting milestones.
Problem-solvingSitting down to untangle one specific problem.
ReviewLooking back at work done, or a period that has passed.
BrainstormingGenerating ideas, nothing settled yet.
InterviewInterviewing or assessing somebody from outside.
SharingPassing on information, training, one-way sharing.

When no type fits, Kara uses the general structure - still complete, just not specialized.

  • Kara detected it - a "Detected: Sales" card appears on the summary, with Use this type and Change type.
  • Kara is unsure - the card says "Could not detect a specific meeting type"; click Choose type to set it. Common when a meeting mixes purposes, or the recording is very short.

The Type field at the head of the note can always be changed, even days later - changing it makes Kara rewrite the summary to the new structure, and the old one is kept in version history. If the list is long, type into Find template to filter.

If 90% of your meetings are Sales, do not pick it every time: open that template and click Set as default.

Refining and regenerating​

The first summary is rarely right for every purpose at once. The one for your manager needs to be short, the one for the file needs to be complete, the one for the client needs to be more polite. Kara can write all three without recording anything again.

Open Refine summary:

OptionChoices
LengthShort · Medium · Long
ToneFriendly · Neutral · Formal
TypesAutomatic, or a specified meeting type
LanguageAutomatic (follow the content), or a specific one

The REFINE SUMMARY panel: Length and Tone sliders, Types and Language selects, and an Apply button at the foot

Click Apply and Kara builds a new version. What to pick:

  • Short + Neutral - for your manager, or pasting into the CRM.
  • Medium + Friendly - to send back to the client.
  • Long + Formal - for the file on a large transaction.

When those four controls are not enough, click Edit with Kara and write the request in words: "Drop the transfer-fee part, the client has not decided.", "Emphasize what the client is still unsure about.", "Rewrite it as bullets." The chat also offers three ready buttons: Make it shorter, More detail, Change the format.

To change one passage rather than the whole thing: select it and choose Ask Kara about the selection - the rest is untouched. For a small error, just edit the summary by hand.

Old versions are not lost​

Every regeneration keeps the old version rather than overwriting it:

  • Current version - the one being shown.
  • Compare with current - see the new one next to the old before deciding.
  • Keep current / Replace with new - decide after comparing.
  • Back to current - return from viewing an older version.

So you can try a different tone without risking the one you already liked.

Refining does not invent facts

Kara rewrites from that same transcript. Ask for "longer" and Kara expands on what was actually said rather than inventing detail the meeting did not contain

  • ask about something nobody mentioned and Kara will say it is not there.

Generating other outputs​

There is more than one way to look at a meeting. Click Generate new output and Kara builds more from the same material:

OutputUse when
Key pointsYou need something very short to skim before the next meeting.
Todo listYou need a task table with owners.
Mind mapThe meeting branched a lot and you want to see the structure.
Slide deckYou need to present it back to the team or the client.
FlashcardsLearning product information or policy by heart.
Short quizChecking whether the team has taken it in.
Podcast scriptListening back on the road instead of reading.
Short videoBuilding a recap clip to send a client.

The GENERATE NEW OUTPUT panel: a list of Keypoints, Todos, Mindmap, Slideshow, Flashcards, Quizzes

These all coexist in the note without overwriting each other. Whatever you no longer need, click its tab and choose Remove.

Quotes and verification​

The summary was written by a machine. Before you pass a number to a client or commit to a date, you need to know where that sentence came from.

Click a line in the summary → Kara jumps to the exact passage in the transcript that produced it. It takes five seconds, and is worth doing for three kinds of information:

  • Numbers - price, floor area, commission percentage, deposit.
  • Commitments - who promised what, by when.
  • Conditions - "if the bank approves then…", "unless the owner changes their mind".

Kara is built to say it does not know rather than guess: ask about something that was not in the meeting and you get "this meeting did not cover that" rather than a plausible-sounding but invented number. Which is also why what has a quote deserves far more trust than what does not.

Even with a quote, a summary can still drift - usually because the transcript misheard, because a joke was read as a real commitment, or because several people talking at once got a sentence attributed to the wrong person. Quotes do not eliminate any of that, but they make it surface in seconds rather than in the next meeting.

Summary templates​

A template decides which sections your summary has and what voice it is written in. Each meeting type is tied to a template, and Kara picks for you in most cases - you go to Settings → Templates when you want to change how it writes.

Edit instructions opens the exact prompt Kara uses for that template. A few useful additions:

  • "Always include a 'Client's stated budget' section with the figure if given."
  • "Put the project name and unit code at the top of the summary."
  • "Do not infer the client's level of interest - record only what they said."
  • "End with my three next steps, not the client's."

Editing instructions affects summaries generated afterwards; it does not rewrite ones that already exist.

Ten standard types not covering your work? Create your own - say "Property viewing" or "Deposit close" - with your own instructions. The template picker also has More options (length, tone, language), set once so you do not have to refine every time.

When to edit the template instead of each summary

If you find yourself fixing the same thing in every summary, that is the sign to fix the template once and be done.

People in the note and contacts​

The transcript can tell who said which line, but at first each voice is only "Speaker 1". Attaching that voice to a real contact is a one-time job, and from then on this meeting counts towards that person's history.

Open People in note at the head of the note:

  • Add someone to the note - type a name or an email. Not in the address book yet? Kara can still add them by email.
  • Add a contact for Speaker 1 - attach a voice to a contact. Kara usually guesses ahead: "Kara thinks this is …", one click and it is done.
  • Attach a different contact / Detach contact - fix a wrong guess.
  • Open contact info - go straight to that person's profile, or Ask Kara about … to ask right there in the note.

The PEOPLE IN NOTE panel: a field to add someone by name or email, one person marked "Not attached to a contact" and one attached with their email

An unattached voice shows "Not attached to a contact" - worth dealing with first, because everything Kara gathers about a client runs through this link. See Contacts.

Artifacts​

An artifact is something Kara builds from a note at your request: an email to a client, a slide deck, an apartment comparison table. The summary is for you to read; an artifact is for you to use - send, present, hand to somebody.

Six ready-made templates:

TemplateProduces
Client recap emailA polite email recapping the meeting, in a client-facing voice.
Internal minutesMinutes for the team: decisions and tasks.
Proposal deckA deck presenting the options to the client.
Comparison tableA table setting the discussed options side by side.
Client concerns mapA mind map of what the client is still unsure about.
Process diagramA diagram of the steps that were agreed.

When none of them fits, just say so: "Build me a status table for the three units the client is weighing up, with prices and legal status."

While building, Kara shows which step it is on: reading the note → asking you if something is missing → waiting for your review → saving to the note → a summary of what it made. The third step is the important one: nothing is saved until you click Create.

Some kinds have their own viewer - slides page through with presenter notes, flashcards flip with Show answer, mind maps expand and collapse branches and tapping a node returns to the source passage, and video lets you pick the channel, the length and the script before rendering.

  • When the source has changed - edit the note after building an artifact and Kara marks it Source changed. Click Update to rebuild, or leave it if the old version has already gone out.
  • Finding them again - the Artifacts tab in a note, or the Artifacts section in the navigation for the whole account.
  • When building fails - it shows Could not be created with Try again. Usually the note is too short or the request too vague; being more specific usually settles it.

Sharing a note​

Open a note and click Share note. There are two ways to share, for two different situations.

Inviting people individually - enter emails (several separated by commas) and click Invite. Invitees get Viewer access: they can read, not edit. The list of people with access appears below, labelled Owner (you) and (You); revoke at any time with Remove access. This is the one to use by default.

A general link - switch General access between two levels:

LevelMeans
Only people invitedOnly people you invited can open it. Nobody else gets in via the link.
Anyone with the linkAnyone with the URL can read it, without signing in.

Click Copy link to get the link.

The Share note dialog: an email invite field with an Invite button, the list of people with access, a General access block with the two levels, and a link field with a Copy link button

"Anyone with the link" means anyone

A forwarded link is a third party reading the whole note - the full transcript, not just the summary. For a meeting holding client information, invite people individually rather than opening a link.

There is a button to preview the screen someone without access sees - use it to check the access level before sending a link out. Someone opening the link without access gets a "You do not have access to this note" screen with a Request access button, which you approve in one tap.

Sharing a whole space opens every note inside it with one link. Handy when handing over a project, but think the scope through. See Spaces.

The recipient usually does not need the whole meeting:

  • To a client - draft a Client recap email rather than sharing the note.
  • To a colleague on your team - sharing the note makes sense, they need the detail.
  • To your manager - a short summary is usually enough.

Sending email​

The most common thing to do after a meeting is send the client a recap. Kara drafts it, you edit and send.

The fastest way: in the share dialog, switch to the Email tab → Compose email. Kara builds the draft from that note. Or use the Client recap email template under Artifacts - same result, different way in.

The Email tab in the share dialog: a To field, a Subject field prefilled with "Recap: …", a Message box holding Kara's draft, and Cancel and Send buttons

This email is not the summary: the summary is written for you, with blunt observations and what the client said in confidence; the email is written for the client, polite, keeping only what should go outside, and closing with the next steps. Do not paste the summary into an email.

Before pressing send, check four things:

  1. The numbers - price, floor area, dates. Click the quote to cross-check.
  2. How people are addressed - names, titles, forms of address.
  3. What you committed to - Kara records what you said, which may be firmer than what you meant.
  4. What should not go out - internal observations, another client's information.

For a quick fix, tell Kara rather than retyping: "Shorter, three paragraphs.", "Drop the transfer-fee paragraph.", "Add a closing line inviting them to view unit 12A at the weekend."

Kara builds the content; sending goes through your own mailbox. If you have linked an email account under Connectors, you can send from within Kara. If not, copy the content into your usual mail client.

Kara does not send on its own

No email leaves your machine without you pressing send. Kara drafts and waits.

Deleting is permanent

Deleting a note or a space has no undo and no trash. Before deleting a space, move out any notes you might still need.